3 Way Male & Female Econoseal J Series Mark II Connector Kit

Description

This kit consists of the following:

1 x 3 Way Male Housing

1 x 3 Way Female Housing

2 x Anti Backout Locks

3 x Male Terminals

3 x Female Terminals

6 x Wire Seals

Terminals and seals to accept a wire size of 0.75mm² – 2.00mm²

Specifications:

• These connectors are manufactured for the automotive market and most other low voltage applications. They are ideal for many applications including car, marine, lorry, motorcycle, race car, caravan etc. and are connected and disconnected quickly and safely.
• The Econoseal connector has been designed to meet the exacting requirements of the automotive industry, for a reliable sealed connector.
• This series of connectors offers polarized mating, discrete cable sealing and contact secondary locking.
• Though designed initially for automotive applications, Econoseal can be used in any industry where a reliable sealed connector needed.
• Econoseal connectors were originally designed for the automotive market but can be used within any sector where a waterproof connector / connection is required.
• Heavy duty housings which protect against the elements.

Econoseal J Series Mark II Connectors:

The Econoseal J Series Connectors Mark II(+) have been developed for use in auto-mobile engine compartments and other applications where waterproof protection and rugged construction are required for electric connections.

Waterproof protection with these connectors is achieved by means of a wire seal which is inserted on the wire and crimped in the insulation support of the contact simultaneously with contact crimping. This system also has a plug to seal up the unused contact cavity and a seal ring preloaded in the plug housing. Both the wire seal and cavity plug have 3 parallel ridges on their external circumference for ease of insertion into the housing cavity.

One of the major features of these products is that insertion force of contacts into the housing is reduced by beveling the edge of the ridge of both the wire seal and cavity plug and making the diameters of the 2 front ridges smaller than that of the 1 rear ridge. Another important feature lets the trapped air out whenever internal pressure has risen excessively due to changes in temperature and atmospheric pressure. In addition, the Mark II(+) Connector has a plate inserted in its housing to detect half-mating of contacts, increase their retention, provide a double tab-lock function and prevent damage of contacts at mating/un-mating.

All sealing surfaces of the housing are located inside and as a result waterproof capability remains intact even when damage has been inflicted on the connector during harness-assembling operations. Mark II(+) Connectors can be assembled easily and fast.