Sub-Total: £0.00
Glass Fuses
Range of glass bodied quick blow fuses suitable for the protection of electrical circuits and appliances.
No products were found matching your selection.
Free UK Next Working Day Delivery On Orders Above £30 Ex VAT
- Automotive Connectors
- 2.8mm Mini Connectors
- 6.3mm Multi Connectors
- AMPSEAL Connectors
- AMP Superseal Connectors
- AMP Superseal 1.0 SeriesAMP SUPERSEAL Connectors 1.0 mm Series Designed for the automotive industry, AMP SUPERSEAL connectors meet the sealing requirements outlined in IEC 529 and DIN 40050 I.P 6.7 specifications. The cap and plug connector housings incorporate pre-assembled secondary locks to help insure correct and complete contact insertion into the housing and helps prevent the contacts from backing out during mating. The secondary lock cannot be closed if the contacts are not correctly inserted into the connector housing. Cavity plugs are available for sealing unused connector cavities. The double spring contact design (main spring andauxiliary anti-overstress spring) insure low insertion and highcontact forces. Advantages: Compact system minimizes packaging requirements Sealing reliability proven under harsh conditions Designed for ease of manual harness assembly, engine mounting and under hood environments Applications: Wire-to-Board (1.0 mm) and ECU applications, under hood or any location where sealing is required Suitable for automotive, truck, bus, or off-road vehicles
- AMP Superseal 1.5 Series
- Anderson Power Products
- Bosch Automotive Connectors
- Delphi Connectors
- Deutsch ConnectorsFor more than 70 years, DEUTSCH products have reliably performed in some of the harshest environments. For automotive, aerospace, defense, marine, industrial commercial transportation, and rail, our product line of DEUTSCH products includes wires, connectors, contacts, and accessories. Today, DEUTSCH is part of the family brands of TE. DEUTSCH connectors are also leaders in autosport and motosport applications.
- DT SeriesThe DEUTSCH DT series environmentally sealed connectors are designed for cable to cable and cable to board applications. The DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. The DEUTSCH DT series general purpose connectors will provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab. The DT series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, and design flexibility. The DT series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell. DEUTSCH DT housings are available in 2, 3, 4, 6, 8, and 12 pin counts and use size 16 DEUTSCH contacts, each with 13-amp continuous capacity. The housings feature an integrated latch for mating.
- DT Series Connector Kits
- DT Series Connector Housings
- DT Series WedgelocksDEUTSCH DT wedgelocks help confirm proper contact alignment within each connector. They are assembled at the mating interface and press into place. Wedgelocks are required components for all DEUTSCH DT housings.
- DT Series TerminalsCrimp Contacts for DT and HD Series Sealed Connectors. From Deutsch, these high-quality circular Nickel plated copper crimp contacts are for use with DT and HD series sealed connectors. These solid contacts have a copper alloy body with nickel plating and a radial crimp type. The DT series radial crimp connectors are rugged quality but offer field-proven reliability.
- DT Series Tooling & Accessories
- DT Series Assortment BoxesDeutsch’s DT Series housings offer field proven reliability and rugged quality. DEUTSCH DT connectors are available in 2, 3, 4, 6, 8, and 12 pin counts and use size 16 DEUTSCH contacts, each with 13-amp continuous capacity within a single housing. Our assorted boxes are supplied with various combinations of the differing pin counts. If you require a bespoke assorted box please feel free to contact us.
- DTM SeriesDEUTSCH DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. Deutsch DTM Series connectors are ideal for transport and other harsh environment signal connector applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. They are often used in engine compartments and transmission tunnels. DEUTSCH DTM Series connectors provide peak connector performance everywhere data signals or critical electronic circuits are needed . The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell. DEUTSCH DTM housings are available in 2, 3, 4, 6, 8, and 12 pin counts. The housings feature an integrated latch for mating.
- DTM Series Connector Kits
- DTM Series Connector Housings
- DTM Series WedgelocksDEUTSCH DTM wedgelocks help confirm proper contact alignment within each connector. They are assembled at the mating interface and press into place. Wedgelocks are required components for all DEUTSCH DTM housings.
- DTM Series Terminals
- DTM Series Tooling & Accessories
- DTM Series Assortment Boxes
- DTM Series with Modifications
- DTP SeriesDEUTSCH DTP environmentally sealed connectors are designed for cable to cable and cable to board applications . DEUTSCH DTP Series connectors are the solution for your power application requirements and can be used in harsh environment applications where even a small degradation in connection may be critical. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.
- DTP Series Connector KitsDeutsch’s DTP Series connector kits offer field proven reliability and rugged quality. DEUTSCH DTP connectors are available in 2 and 4 pin counts and use size 12 DEUTSCH contacts, each with 25-amp continuous capacity within a single housing.
- DTP Series Connector HousingsThe DEUTSCH DTP Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. DEUTSCH DTP housings are available in 2 and 4 pin counts and use size 12 DEUTSCH contacts, each with 25-amp continuous capacity. The housings feature an integrated latch for mating.
- DTP Series WedgelocksDEUTSCH DTP wedgelocks help confirm proper contact alignment within each connector. They are assembled at the mating interface and press into place. Wedgelocks are required components for all DEUTSCH DTP housings.
- DTP Series TerminalsCrimp Contacts for DTP and HD Series Sealed Connectors. From Deutsch, these high-quality circular Nickel plated copper crimp contacts are for use with DTP and HD series sealed connectors. These solid contacts have a copper alloy body with nickel plating and a radial crimp type. The DTP series radial crimp connectors are rugged quality but offer field-proven reliability.
- DTP Series Tooling & Accessories
- DTP Series Assortment BoxesDeutsch’s DTP Series housings offer field proven reliability and rugged quality. DEUTSCH DTP connectors are available in 2 and 4 pin counts and use size 12 DEUTSCH contacts, each with 25-amp continuous capacity within a single housing. Our assorted boxes are supplied with various combinations of the differing pin counts. If you require a bespoke assorted box please feel free to contact us.
- DTHD SeriesDTHD connectors are single terminal connectors for heavy duty applications. Easy to install, environmentally sealed and compact in size, they are a simple, field serviceable alternative to a splice. DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line. Key Benefits: 1 Cavity arrangement that accepts contact sizes 4 (100 amps), 8 (60 amps), and 12 (25 amps). Circular, thermoplastic housing In-line or flange mount.
- HDP20 & HD30 SeriesThe HDP20 Series is a heavy duty rated, environmentally sealed, composite shell, multi-pin connector. The composite thermoplastic shell is ideal in applications where chemicals can damage a connector housing. HDP20 features quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system.
- HDP/HD Connector KitsThe Deutsch HD/HDP Series was developed to provide a solution to today’s system problems found in the heavy duty trucking, equipment and transportation industries. The HD/HDP is a cylindrical, multi-pin, sealed device utilizing crimp type contacts that are quickly and easily inserted or removed. Use of the HD/HDP Series eliminates several other common connector problems.
- HDP/HD Connector HousingsDeutsch plastic shell HDP20 Series provide cost effectiveness with heavy duty terminations for the truck, bus & off-highway industries. Other features include: silicone wire and interfacial seals, visual indication of lock and mated position. Corrosion proof plastic shells and use of low cost stamped and formed contacts provides a cost effective solution for your application. The HDP20 uses a bayonet coupling system to provide a vibration resistant locking mechanism. This shell provides a multiple keying system that positively prevents mismating and makes plug and receptacle coupling quick and easy. Receptacles mount with a single hole using a “flat” to prevent the connector from rotating.
- HDP/HD Tooling & Accessories
- DT SeriesThe DEUTSCH DT series environmentally sealed connectors are designed for cable to cable and cable to board applications. The DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. The DEUTSCH DT series general purpose connectors will provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab. The DT series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, and design flexibility. The DT series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell. DEUTSCH DT housings are available in 2, 3, 4, 6, 8, and 12 pin counts and use size 16 DEUTSCH contacts, each with 13-amp continuous capacity. The housings feature an integrated latch for mating.
- DIN Connectors
- Econoseal Connectors
- ISO Connectors
- Kostal Connectors
- Lucas Rists Connectors
- Lucas Style 4.7mm Bullet Connectors
- Mate N Lok Connectors
- Timer Connectors
- VAG Connectors
- BMW / Ford / Honda / Land Rover / Mercedes-Benz / Nissan / Renault / ToyotaThese Connector kits within this category are used on a wide range of applications on Honda, Nissan, Renault, Toyota and many more vehicle manufacturers. They are manufactured mainly by Sumitomo, TE Connectivity or Yazaki.
- Audio
- Battery Items
- Connector Boots
- Fuses & Holders
- Grommets
- Lighting
- Relays & Holders
- Switches
- Terminals
- Accessories
- Other